1.0 HP - CRI4R-3E/9 GENIE - 100mm Borewell Submersible Pumpset
1HP 9ST CRI4R-3E GENIE W5 32D 1P DS WP (With control panel)
AvailabilityIn stock
SKU
11038
Special Price
₹16,210.00
Regular Price
₹20,158.00
C.R.I. Genie 100 mm (4”) Borewell submersible pump is firmly coupled to a submersible electric motor PUMPSETS which operates submerged beneath the surface of water.
The optimal design of impeller and diffuser enables the best possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering.
All vital components of these pumps are made up of corrosive resistance thermoplastic and the shaft is of SS 431.
Power (HP) | 0.75 kW (1HP) |
Stage | 9 |
Speed | 2800 RPM |
Version | Single phase 220V |
Max Head | 71 metre |
Max Flow | 1.4 lps (5.04 m³/hr) |
Maximum outer diameter | 98 mm |
Nominal outlet size | 32 mm |
Degree of protection | IP 58 |
Direction of rotation | 1Ph-Counter clockwise from driving end |
Thrust load | 0.37kW - 0.75kW - 650 lbs |
Minimum cooling flow along the motor | 0.15 m/sec |
Type of duty | S1 (Continuous) |
Method of starting | 1Ph -Capacitor Start Capacitor Run(CSCR) |
Maximum starts per hour | 20 times |
Motor Type | Water Filled |
Warranty | 12 Months |
- Motor portion covered with corrosive resistance Stainless steel shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures rigidity & service feasibility
- Designed for wide voltage operation
- Additional intermediate bearing in higher stage pumps
- Domestic and municipal water supply
- Rural water supply
- Sprinkler system
- Pressure boosting units
- Fire fighting system
- Industrial and mining application
- Fountains
Model | kW | HP | Stage | Outlet Size in mm | m³/hr | 0 | 1.8 | 2.16 | 2.52 | 2.88 | 3.24 | 3.6 | 4.32 | 5.04 |
lps | 0 | 0.5 | 0.6 | 0.7 | 0.8 | 0.9 | 1 | 1.2 | 1.4 | |||||
CRI4R-3E/09*# | 0.75 | 1 | 9 | 32 | Head in Metres | 71 | 65.5 | 63.5 | 61.2 | 58.2 | 53.6 | 49.6 | 41.2 | 31.8 |
MATERIAL OF CONSTRUCTION - PUMP | |
Part Name | Material |
Suction housing | Cast iron |
Impeller | Noryl |
Diffuser chamber | Noryl |
Check valve housing | Cast iron |
Check valve | Delrin |
Outer shell | SS 304 |
Pump shaft | SS 304 |
Counter thrust pad | SS 304 / Hylem |
Intermediate bearing (Sleeve / Bush) | SS 304 / NBR / LTB 4 / Teflon Carbon / Gunmetal with rubber |
Coupling | SS 304 / 410 |
MATERIAL OF CONSTRUCTION - MOTOR | |
Part Name | Material |
Shaft seal | Nitrile butyl rubber |
Rotor Shaft | SS 410 / 431 |
Stator Shell | SS 441 |
Journal bushes | Carbon |
Snap ring | SS 316 |
Thrust assembly | SS 420 & Graphite Carbon |
Diaphragm | High Nitrile butyl rubber |
Motor base | Cast iron |
Write Your Own Review