1.0 HP - PLANO 102 - C.R.I. Horizontal Openwell Submersible Pumpsets
1.0 HP 25D PLANO102 HOWS 1PH 3M
AvailabilityIn stock
SKU
19447
Special Price
₹12,107.00
Regular Price
₹15,055.00
C.R.I. Horizontal Openwell Submersible Pumpsets are ideally suitable for Openwell / Tanks where a wide
fluctuation of water level occur. The pumpset works underwater and rest at the bottom of the well or Tank.
Hence suction and priming problem will not arise. The optimal design of impellers and diffusers enables
the best possible hydraulic efficiency. Motor sealing is made by polymers, 'O' rings, oil seals and sand
guard to avoid ingress of well water/sand into the motor. Pressure equalizing rubber diaphragm is provided
to guard the motor from pressure and volume variation of water inside the motor. Plano
must be filled with clear, cold, drinking water as detailed in our operator's manual.
| SPECIFICATIONS | |
| Power (HP) | 0.75 kW (1 HP) |
| Speed | 2880 RPM |
| Version | Single phase 220 - 240V |
| Max Head | Upto 35 metre |
| Max Flow | 2.8 lps (10.1 m³ /hr) |
| Nominal outlet size | 25 mm |
| Degree of protection | IP 58 |
| Direction of rotation | 1Ph - Clockwise from driving end |
| Type of duty | S1 (Continuous) |
| Method of starting | Single Phase - CSR |
| Maximum starts per hour | 10 times |
| Warranty | 12 Months |
- High operating efficiency
- Motor is designed with higher cooling effect to ensure the life
- Anti corrosive stainless steel body
- Easy installation and user friendly design
- Wide voltage operation
| Model | kW | HP | Outlet Size in mm | m³/hr | 0 | 1 | 1.8 | 2.7 | 3.6 | 4.5 | 4.7 | 5.4 | 5.6 | 6.5 | 7.2 | 7.4 | 7.6 | 7.7 | 8.6 | 9.4 | 10.1 |
| lps | 0 | 0.3 | 0.5 | 0.8 | 1 | 1.3 | 1.3 | 1.5 | 1.5 | 1.8 | 2 | 2.1 | 2.1 | 2.2 | 2.4 | 2.6 | 2.8 | ||||
| Plano 102 | 0.75 | 1 | 32 25 | Head in Metres | 35 | 33 | 31 |
30 |
28 | 27 | 26.5 | 26 | 25 | 24 | 23.5 | 23 | 22 | 21 | 18 | 15 | 14 |
| MATERIAL OF CONSTRUCTION - PUMPSET | |
| Part Name | Material |
| Motor Body | SS 304 |
| Impeller | Noryl |
| Casing | Cast Iron |
| Rear Cover | Cast Iron |
| Shaft | SS 410 |
| Front Bracket | Cast Iron |
| Shaft Seal | Nitrile Butyl Rubber |
| Thrust Assembly | Leadded Bronze & Compostos and Ferobestos |
| Diaphragm | High Nitrile Rubber |
Write Your Own Review